English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine · International equipment · Model

KVH TracPhone V3-IP

A tracking antenna does not prove modem login or permission to transmit. Read the separate states before changing anything.

Confirm your model

Confirm TracPhone V3-IP and its Integrated CommBox Modem (ICM), using KVH help family 54-0890. Support lists separate antenna, ICM and modem serial numbers plus the MTA MAC address; the modem and MTA are inside the ICM. Record those identities privately before requesting parts or service. V3, V3-HTS and an Iridium Pilot installation are different systems.

How it connects

  1. V3-IP antenna Antenna / ICM communication
  2. ICM / modem / MTA Configured Ethernet or Wi-Fi access
  3. Vessel client network
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

The antenna/ICM satellite path is separate from the vessel’s local network. The ICM offers four Ethernet ports and a built-in wireless access point, but their access roles depend on the installed configuration. Identify the affected device’s port or Wi-Fi connection and have the administrator compare its assigned network and login requirements. Do not change Crew, Static IP or Dual Dome settings merely to obtain a connection; changing configuration can switch the built-in Wi-Fi off.

Lights and messages

  • Read Antenna State separately from Connection Status and Support’s Login State. Tracking concerns the antenna; Attempting Login or Waiting concerns network access. Preserve the exact combination rather than replacing a modem because the antenna is tracking.
  • No-Transmit Zones uses both text and color: orange Transmit Disabled means the configured zone is being enforced; red Transmit Enabled means zones are being ignored. A red Enabled label is not a normal all-clear. Preserve safety zones and ask the authorized operator to assess the state; do not disable a restriction to test traffic.
  • My Phone and the individual line status describe voice service separately from VSAT data. Record whether voice is Logging In, Offline or Online & Ready, and whether the line is Available or Unavailable. A data-only or voice-only failure is more specific evidence than “the satellite is down.”

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • Optional CommBox software changes how the ICM is managed: KVH configures its network settings remotely and local network fields are unavailable. CommBox credentials differ from the ICM administrator password. Missing editable fields therefore do not by themselves justify a replacement router or modem.
  • Before ordering a replacement ICM, modem-related part or network accessory, give KVH the exact antenna/ICM identities and installed configuration. The historical help describes a service architecture, not a current compatibility or airtime guarantee. Have support confirm the part and present service eligibility; do not use a V3-HTS part or configuration by name similarity.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓