Your country is detected for each new visit. You can choose your country and language.
100 tools & accessories · worldwide
Tools for the job
Diagnose the fault before buying equipment. The right tool depends on your receiver, antenna, connectors and service.
Tools, fittings & parts
100 choices for checking, connecting and maintaining your setup. Start with the troubleshooting checks, then buy only what you need. These are product-type searches, not individually tested product recommendations.
Opens search results. Check the individual product specification; results may include unrelated or sponsored items.
Links start at Amazon.com; Amazon may direct you to a local store. Check the store, delivery, seller, returns and exact compatibility before buying. A local match is not a compatibility check.
As an Amazon Associate, FixSatellite earns from qualifying purchases.
Matching choices: 100
No matches. Try a shorter search or clear the filters.
Hand tools
For accessible fasteners and small adjustments permitted by the equipment manual. Match the fastener size; do not loosen dish alignment bolts during routine troubleshooting.
7/16-inch F-connector wrench
Check before buying
Check that the connector nut is 7/16 inch and that the wrench can reach it without twisting the cable. Follow the equipment manual for tightening.
Paid link: we may earn a commission from qualifying purchases.
Choose jaw length and grip for small loose parts in an unpowered work area. Do not use the jaws to tighten F-connectors or crush coax; comfort grips are not proof of electrical insulation.
Paid link: we may earn a commission from qualifying purchases.
Check the connector size, torque units and preset value or adjustment range. Use the equipment maker’s specified torque; there is no single setting for every satellite connector.
Paid link: we may earn a commission from qualifying purchases.
For making documented cable terminations. Disconnect the cable from all equipment and power first; match the cable, connector, strip dimensions and tool. A ready-made cable may be simpler.
RG6 / RG6 quad-shield stripper
Check before buying
Match RG type, cable diameter, shield layers and the connector maker’s strip dimensions. Compression and crimp tools are different.
Paid link: we may earn a commission from qualifying purchases.
Choose a cutter rated for the cable diameter and centre-conductor material. A tool for copper cable may not be suitable for copper-clad steel; disconnect the cable before cutting.
Paid link: we may earn a commission from qualifying purchases.
For trimming plastic cable-tie tails neatly. Check the cutter’s material rating, protect the cable beneath the tie and wear eye protection; these are not general-purpose coax cutters.
Paid link: we may earn a commission from qualifying purchases.
Match the blade to the terminal block or keystone jack, such as 110 or 66. This seats wires in compatible terminals; it does not crimp RJ45 plugs. Work only on disconnected cabling.
Paid link: we may earn a commission from qualifying purchases.
Check that the tool supports your F-connector design and cable size. It helps grip the connector during assembly; a compression connector still needs its specified compression tool.
Paid link: we may earn a commission from qualifying purchases.
Match 75-ohm satellite coax, cable diameter, shielding and the equipment’s frequency range. Extra joints can introduce faults. Disconnect power before changing coax connections; a fitting alone does not make a joint waterproof.
RG6 F compression connectors
Check before buying
Match RG type, cable diameter, shield layers and the connector maker’s strip dimensions. Compression and crimp tools are different.
Paid link: we may earn a commission from qualifying purchases.
A splitter is not a universal way to add receivers. Have your provider confirm the exact system, part number, frequency range, DC path, power limits and unused-port treatment. SWM, SCR/Unicable, conventional satellite and cable TV parts are not interchangeable.
2-way satellite splitter
Confirm with provider / installer
Check before buying
Ask the provider to confirm this exact part and wiring layout before ordering. Port count alone does not establish compatibility.
Paid link: we may earn a commission from qualifying purchases.
Choose the measurement you need: cable continuity, network wiring and satellite signal quality are different tests. A basic cable tester cannot align a dish. Ordinary satellite-TV finders are not Starlink alignment tools.
Coax continuity tester
Check before buying
For isolated, unpowered cables only. Checks wiring faults, not satellite reception quality; check whether the tester works through splitters.
Paid link: we may earn a commission from qualifying purchases.
Check the supported cable category, connector and fault types. A wiremap tester checks conductor connections; it does not prove internet speed or certify the cable’s data performance.
Paid link: we may earn a commission from qualifying purchases.
For a trained technician following an approved low-voltage test procedure. Match ratings, leads and fuses; do not open power supplies or probe mains outlets as a DIY satellite check.
Paid link: we may earn a commission from qualifying purchases.
Installer selection: confirm the actual satellite system, modulation, LNB controls and required measurements. DVB-S2 alone is not proof of DIRECTV, DISH or wideband compatibility.
Paid link: we may earn a commission from qualifying purchases.
Installer selection: confirm the actual satellite system, modulation, LNB controls and required measurements. DVB-S2 alone is not proof of DIRECTV, DISH or wideband compatibility.
Paid link: we may earn a commission from qualifying purchases.
Try a known-working cable before replacing one. Match both ends, length, signal type and installation rating. A cable that fits is not necessarily suitable for dish power or outdoor use.
HDMI cable
Check before buying
Match the actual ports and supported format on both devices. An adapter does not automatically convert an incompatible signal.
Useful when: The TV cannot show the receiver menu after you select the correct input. Compare with a known-working cable.
Skip the purchase: A clear receiver menu with a satellite reception error is not an HDMI-cable diagnosis.
Match both connectors, the required length and the video format supported by your receiver and TV.
Paid link: we may earn a commission from qualifying purchases.
For ordinary Ethernet cabling. Match cable category, conductor type and plug/tool design; not proprietary dish cabling.
Useful when: Your documented setup supports a wired LAN comparison, or a known-good cable confirms an indoor LAN cable fault.
Skip the purchase: A cable will not clear an outage or a dish obstruction. Test near the router first.
Use ordinary RJ45 LAN ports only. Starlink Gen 2 needs its matching Ethernet adapter; Gen 3 Router 3 has LAN ports. This is not a dish, power or weatherproof outdoor cable.
Paid link: we may earn a commission from qualifying purchases.
Keep cables identifiable and accessible without pinching them or blocking equipment ventilation. Photograph the original layout; do not disconnect cables just to tidy them.
Removable cable labels
Check before buying
Check size, removability and surface compatibility. Leave cable slack and ventilation space; avoid tight bends or crushed jackets.
Useful when: You need to record an accessible indoor cable path before a permitted change. Photograph the original setup too.
Skip the purchase: Paper tape and a clear photo may be enough. Labelling does not repair a connection.
Choose removable indoor labels. Do not cover vents, safety markings or connectors, and do not unplug cables just to label them.
Paid link: we may earn a commission from qualifying purchases.
Use the cable and equipment manufacturer’s sealing method. Outdoor cable entries, drilling and roof work need suitable materials and a qualified installer. Tape cannot fix a damaged cable or replace required grounding.
Self-fusing sealing tape
Confirm with provider / installer
Check before buying
Match the cable diameter, exposure rating and approved sealing method. Have an installer check wall or roof penetrations and drainage.
Paid link: we may earn a commission from qualifying purchases.
Choose internal diameter for the cable bundle, bend clearance and an outdoor UV rating where needed. Split conduit offers mechanical protection; its seam does not create a waterproof enclosure.
Paid link: we may earn a commission from qualifying purchases.
Confirm dish model, pole diameter, load, wind exposure and mounting surface with an installer. Do not improvise roof, wall or vehicle attachments. Landlord and building requirements may also apply.
Dish pole clamps
Confirm with provider / installer
Check before buying
Installer must confirm dimensions, load and attachment method for this dish. Similar-looking mounts are not necessarily interchangeable.
Paid link: we may earn a commission from qualifying purchases.
Match the mast’s outside diameter and cap material to the manufacturer’s design. A cap covers the mast end; it does not strengthen a damaged pole or replace a mounting repair.
Paid link: we may earn a commission from qualifying purchases.
Useful for seeing labels, measuring and keeping small parts safe at an accessible work area. These accessories do not make roof, electrical or ladder work safe. Stop and get help if access is unsafe.
LED headlamp
Check before buying
Choose a comfortable strap, adjustable beam and enough battery life to read labels with both hands free. Check the stated weather rating if it will be used outdoors.
Paid link: we may earn a commission from qualifying purchases.
A compact beam helps read connector labels and inspect accessible cable jackets. Compare beam spread, battery type and runtime, not just the maximum brightness.
Paid link: we may earn a commission from qualifying purchases.
Choose a stable stand or secure mounting arrangement and light spread for the work area. Check battery runtime or cable length without creating a trip hazard.
Paid link: we may earn a commission from qualifying purchases.
Choose a mirror size and adjustable angle that let you read rear labels without moving the equipment. Keep the mirror and shaft outside vents and electrical openings.
Paid link: we may earn a commission from qualifying purchases.
Choose readable units and enough length to measure the planned cable route. Allow for routing and connector access; never extend a metal tape near live electrical parts.
Paid link: we may earn a commission from qualifying purchases.
Choose eye protection with a documented impact rating suitable for the task and your location. Check fit, side coverage and compatibility with prescription glasses if needed.
Paid link: we may earn a commission from qualifying purchases.
Use a stable tray with raised edges to keep removed screws and small fittings together. Choose compartments if parts from different devices must stay separate.
Paid link: we may earn a commission from qualifying purchases.
Match the mat size and surface to your workbench and loose parts. A non-slip mat is not automatically an ESD mat or electrically insulating protection.
Paid link: we may earn a commission from qualifying purchases.