Applies to: Bell Satellite TV Slim remote only; not Bell Fibe, a legacy SAT-button remote or a universal remote.
Match your symptom
| What you see | What to do next |
|---|---|
| Channels work, volume does not | Use TV programming, not receiver code 0006. |
| TV works, channels do not | Check Slim receiver programming and compatibility. |
Work through these checks
Check batteries and the clear path
Replace the AAA batteries as a matching set, following the compartment polarity. Remove obstacles and test near the receiver. Stop for leakage, heat or damaged contacts.
What the result means: Do not open the receiver.
Restore Slim receiver control
On the correct Slim model, hold Options for three seconds to get two green flashes; enter 0006 and check for two more flashes. Test the guide or channel buttons. If unsuccessful, use Bell’s model-specific remote-address instructions; record the existing address before changing it.
What the result means: Do not use a legacy SAT-button sequence on Slim.
Set up TV control separately
If channels respond but TV power or volume does not, open the official Slim TV-code list below and follow Bell’s TV programming section for your television. Test power, volume and mute after saving. Receiver code 0006 is not a TV-brand code.
What the result means: A working TV button does not prove receiver control.
When to stop and get help
Contact Bell if correct batteries and Slim programming fail. Ask for a replacement compatible with both the receiver and required functions. Do not reset the satellite installation, disturb roof wiring or buy based only on a similar photo.
What to tell support
Record the two model labels, functions that fail, green-light response, existing remote address and steps tried. Do not share account passwords or activation codes.
Common questions
Will this work on Bell Fibe?
No. Match the exact service, remote and receiver before following a programming sequence.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.