English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine / Detailed guide

Jotron Tron 60S / 60GPS EPIRB family · Exact manual and safe first checks

Jotron Tron 60S / 60GPS EPIRB family · 85525 Rev. O; revision log 26.06.25 (DD.MM.YY)

Applies to: Jotron Tron 60S / 60GPS EPIRB family · 85525 Rev. O; revision log 26.06.25 (DD.MM.YY)

Work through these checks

  1. 01 · Jotron Tron 60S / 60GPS EPIRB family

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · Tron 60S / Tron 60GPS / 85525 Rev. O / READY / TEST

    Match Tron 60S or Tron 60GPS to 85525 Rev. O, 26 June 2025; only 60GPS has GPS. Interpret an already-recorded, authorized test result, without starting another test. Normal self-test flashes and extended GPS-test beeps are different code tables: 5 flashes means the 406 MHz phase-locked loop was out of lock, whereas 5 beeps means no GPS position was acquired. In the normal table, 7 flashes means the EPIRB module was not programmed or programming was incomplete; do not attempt programming. In an existing extended GPS test, 2 beeps confirms a position was received, not delivery of a distress alert or rescue readiness. This GPS-test interpretation does not apply to 60S. Record the test type, count and time privately; conceal the beacon identifier and location. Do not move READY/TEST or activation controls, remove the beacon from its bracket, wet or touch water contacts, initiate or cancel an alert, repeat tests, open, program or repair the beacon. Test transmissions and service work require the appropriate authorized procedure; arrange a Jotron-authorized service assessment instead of experimenting. Do not use this troubleshooting page as emergency operating instructions or as proof of current vessel compliance.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.