English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine · International equipment · Model

Thuraya MarineStar · MNB-01

Read the status before reporting a fault. Power, crew-call permissions and geofence policy can produce different symptoms; a failed call alone does not identify a defective antenna.

Confirm your model

Match model MNB-01 on the installed terminal, not the marketing name alone: the manual notes that regional branding can vary. This page uses original manual V2.0. Read the IMEI number and S/W version views for the support record, keeping identifiers private. Do not substitute instructions for a different MarineStar generation merely because its name is similar.

How it connects

  1. Active antenna / ADU Separate SAT (N) and GPS (SMA) RF cables
  2. MNB-01 base terminal RJ11 voice extension
  3. Analog phone / PBX extension
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

The above-deck active antenna has separate SAT and GPS RF paths to the base terminal: SAT uses N-type connectors and GPS uses SMA. The base has its own voice handset and an RJ11 extension for an analog phone/PBX. RS-232 provides the documented GmPRS/integration path; the micro-USB port is for terminal debugging, not a documented consumer broadband modem socket. Identify the affected path without moving powered cables.

Lights and messages

  • The power LED is green when input power is present; flickering means low or high input voltage in this manual. This is a supply observation, not a satellite-registration result. Record any flicker and simultaneous display changes for qualified service rather than changing antenna settings.
  • Read the network-registration line separately from signal/status icons. Radio silence, weak signal, GmPRS connecting and GmPRS paused are distinct displayed states. The manual says Radio silence stops transmission in a predefined zone; preserve the fleet policy and report the exact icon/location rather than disabling the zone to test a call.
  • For “Insert SIM Card” despite an inserted card, consult Thuraya’s SIM-adapter advisory before blaming the antenna. It reports poor contact or damaged holder pins when the supplied adapter was omitted. Preserve the warning and card/adapter history for support; do not force the card or improvise a spacer. Power off before any authorized SIM handling.

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • The documented package has separate 25 m SAT N/N and GPS SMA/SMA cables, a 5 m power lead and a SIM adapter. Confirm approved antenna and cable requirements with the supplier for an existing installation; a replacement connector or cable of arbitrary length is not established as equivalent. Preserve the separate SIM-adapter advisory already listed here.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓