English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite internet / Detailed guide

Cobham EXPLORER 323 land-vehicular BGAN terminal · Exact manual and safe first checks

Cobham EXPLORER 323 land-vehicular BGAN terminal · 98-169085-B; release5March2020;158PDFpages

Applies to: Cobham EXPLORER 323 land-vehicular BGAN terminal · 98-169085-B; release5March2020;158PDFpages

Work through these checks

  1. 01 · Cobham EXPLORER 323 land-vehicular BGAN terminal

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · EXPLORER 323 / 98-169085-B / Terminal status / Ready / Data / Calibrating / Validating / Completed / M2M SIM / Data or time limit exceeded / Preparing for software update

    Match EXPLORER 323 to the 158-page manufacturer-authored User & Installation Manual 98-169085-B, released 5 March 2020, in the Remote Satellite distributor-linked CDN archive; the upload timestamp is not the edition. This is a land-vehicular BGAN terminal, not EXPLORER 325/327/727 or a maritime system. In an existing authorized web session, only read Terminal status, signal strength, antenna state, current satellite and GNSS fix context (PDF page 67). Ready indicates network registration/readiness, while Data means a data connection is running; neither alone proves an application transfer. Record the existing M2M SIM flag: voice and Streaming services are not available with an M2M subscription, so do not infer identical services from a shared case or manual. Existing mounting states differ (page 32): Calibrating follows first installation/factory reset and cannot track while moving in that state; Validating after restart uses previous mounting information and attempts tracking; Completed means calibration/validation finished, not proof of internet service. Do not restart, drive a route or move the vehicle/antenna to test or calibrate. Record existing alerts: Data or time limit exceeded can close a data connection because a configured usage limit was reached, not necessarily a signal fault; preserve the limit and do not restart sessions or raise it (page 116). Thermal alerts can reduce speed, close connections or shut down; LTE interference protection can temporarily switch off satellite reception or trigger re-registration (pages 115–119); do not disable protection, move the system or switch transmitters as a test. Preparing for software update means preparation is underway; do not interrupt a known update or start another (page 117). Existing call/data logs and totals use UTC and are only since last clearing; preserve them without clearing, resetting counters, downloading or sending a diagnostic report (page 69). No calls, messages, data-session activation, AT commands, PIN/SIM/APN/network changes, pointing/calibration, reset/reboot/update, voltage/fuses/grounding, opening, roof/magnet work, charging or battery actions. Powered installation and accessible-connection assessment require competent service and safe isolation; do not exchange cables with the vehicle engine running. Protect identifiers, phone numbers, logs, IPs, credentials and precise location. This historical original does not promise current network/service availability, options, compatibility or approval.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.