Confirm your model
Cobham EXPLORER 323 land-vehicular BGAN terminal · 98-169085-B; release5March2020;158PDFpages. Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
How it connects
Match EXPLORER 323 to the 158-page manufacturer-authored User & Installation Manual 98-169085-B, released 5 March 2020, in the Remote Satellite distributor-linked CDN archive; the upload timestamp is not the edition. This is a land-vehicular BGAN terminal, not EXPLORER 325/327/727 or a maritime system. In an existing authorized web session, only read Terminal status, signal strength, antenna state, current satellite and GNSS fix context (PDF page 67). Ready indicates network registration/readiness, while Data means a data connection is running; neither alone proves an application transfer. Record the existing M2M SIM flag: voice and Streaming services are not available with an M2M subscription, so do not infer identical services from a shared case or manual. Existing mounting states differ (page 32): Calibrating follows first installation/factory reset and cannot track while moving in that state; Validating after restart uses previous mounting information and attempts tracking; Completed means calibration/validation finished, not proof of internet service. Do not restart, drive a route or move the vehicle/antenna to test or calibrate. Record existing alerts: Data or time limit exceeded can close a data connection because a configured usage limit was reached, not necessarily a signal fault; preserve the limit and do not restart sessions or raise it (page 116). Thermal alerts can reduce speed, close connections or shut down; LTE interference protection can temporarily switch off satellite reception or trigger re-registration (pages 115–119); do not disable protection, move the system or switch transmitters as a test. Preparing for software update means preparation is underway; do not interrupt a known update or start another (page 117). Existing call/data logs and totals use UTC and are only since last clearing; preserve them without clearing, resetting counters, downloading or sending a diagnostic report (page 69). No calls, messages, data-session activation, AT commands, PIN/SIM/APN/network changes, pointing/calibration, reset/reboot/update, voltage/fuses/grounding, opening, roof/magnet work, charging or battery actions. Powered installation and accessible-connection assessment require competent service and safe isolation; do not exchange cables with the vehicle engine running. Protect identifiers, phone numbers, logs, IPs, credentials and precise location. This historical original does not promise current network/service availability, options, compatibility or approval.
Before buying parts
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓