Confirm your model
Check the base label for Pathway X2 and both coax port names. Do not use Playmaker or in-motion wiring instructions.
How it connects
- Pathway X2 antenna at ground level Primary SAT IN to MAIN supplies antenna power
- Compatible primary DISH receiver Receiver HDMI to the selected TV input
- Television on the correct HDMI input
Acquire with a direct receiver-to-antenna coax route. The Rev7 10-17 manual recommends the supplied 25 ft cable, limits length to 50 ft, and warns of second-receiver signal loss when the primary changes satellites. Confirm current receiver/arc guidance.
Lights and messages
- In the source manual, 150 means not all satellites found; 151 means none found. Check sky, cable and setup rather than assuming a motor failure.
A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.
Before buying parts
- Use compatible receiver and satellite coax. No roof or ladder mounting workaround; keep fingers clear of the moving base. Do not buy a splitter to create independent satellite pointing.
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓