Confirm your model
Winegard Pathway X1, identified by the OEM as PA-2000/PA-2035, using original manual 2452314 Rev7 10-17. This is not Pathway X2, Playmaker or Carryout. The manual’s United States reception and receiver examples are historical documentation, not confirmation of current compatibility, subscription or coverage. Use while stationary only.
How it connects
- Pathway X1 MAIN coax → SAT IN
- Primary receiver Receiver TV output
- TV
The primary receiver’s SAT IN connects to MAIN on the antenna. The receiver supplies the antenna electronics through MAIN; a cable on SEC alone does not provide that power. An optional second receiver has a separate SEC-to-SAT IN coax path, while each receiver’s TV output is separate. The primary receiver selects the satellite shared by both receivers.
Lights and messages
- These are receiver-screen observations, not antenna LED codes. Missing Mobile Antenna Setup is listed against receiver-to-antenna communication or receiver-software compatibility. Error 150 All Satellites Not Found differs from 151 No Satellites Found. A secondary receiver losing channels after a primary satellite change is a separate shared-satellite limitation.
A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.
Before buying parts
- The original includes a 25-foot coax cable and describes the supplied handle. Its listed mount options are TR-1518 tripod, RK-2000 roof kit and MT-SM30 window mount. It expressly excludes the Carryout ladder mount. These exact options do not approve another mount or later receiver; installation and existing cable-route questions belong to a qualified installer.
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓