English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Phones & messengers · International equipment · Family

SAILOR TT-3026D / M / S easyTrack family

Match TT-3026D/M/S to TT98-121798 Revision A, the complete 47-page briefing/user document; copyright 2005 does not establish its publication date. Do not substitute L/LM, TT-3020C/3022D or SAILOR 3027 instructions.

Confirm your model

SAILOR TT-3026D / M / S easyTrack family · TT98-121798 RevisionA; complete 47-page briefing/user document; copyright 2005 is not an established publication date. Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

How it connects

Match TT-3026D/M/S to TT98-121798 Revision A, the complete 47-page briefing/user document; copyright 2005 does not establish its publication date. Do not substitute L/LM, TT-3020C/3022D or SAILOR 3027 instructions. Observe only an existing authorized easyMail session. PC Connect green means the application is connected to easyTrack; red means no local application connection, not uniquely lost satellite RF. Ant Signal has five steps: green indicates good satellite-signal quality, red no signal. GPS green indicates GPS is OK; red can mean GPS error or no antenna connection, not proof of one particular failed part. Record those three indications separately; local connection or GPS success is not proof of network login, message delivery or ordinary internet access. Existing Transceiver Status and GPS Status refresh every 10 seconds, while Position refreshes every minute; differing timestamps alone do not prove a frozen receiver. Position is also an editing dialog: confirming OK can change the stored position, so do not enter or confirm coordinates. Mobile Status Field describes the transceiver's state; Info bar is the last information received, with a log of the last 500 information messages, not every entry an active fault. Keep original indications and times, with mobile numbers, serials, addresses, positions and message content private. Do not install software, open a new session, send messages/reports, start tests, operate distress/SSAS controls, acknowledge alarms, log in/out, scan, issue commands, edit position/passwords/configuration, reset, update, unplug cables or move antennas. Preserve the installed safety system and refer persistent faults to the responsible operator or qualified service. Historical documentation does not establish present service availability or certification.

Before buying parts

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓