Applies to: SAILOR TT-3026D / M / S easyTrack family · TT98-121798 RevisionA; complete 47-page briefing/user document; copyright 2005 is not an established publication date
Work through these checks
01 · SAILOR TT-3026D / M / S easyTrack family
Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
02 · TT-3026D/M/S / PC Connect / Ant Signal / GPS / Transceiver Status / GPS Status / Position / Info bar / Mobile Status Field
Match TT-3026D/M/S to TT98-121798 Revision A, the complete 47-page briefing/user document; copyright 2005 does not establish its publication date. Do not substitute L/LM, TT-3020C/3022D or SAILOR 3027 instructions. Observe only an existing authorized easyMail session. PC Connect green means the application is connected to easyTrack; red means no local application connection, not uniquely lost satellite RF. Ant Signal has five steps: green indicates good satellite-signal quality, red no signal. GPS green indicates GPS is OK; red can mean GPS error or no antenna connection, not proof of one particular failed part. Record those three indications separately; local connection or GPS success is not proof of network login, message delivery or ordinary internet access. Existing Transceiver Status and GPS Status refresh every 10 seconds, while Position refreshes every minute; differing timestamps alone do not prove a frozen receiver. Position is also an editing dialog: confirming OK can change the stored position, so do not enter or confirm coordinates. Mobile Status Field describes the transceiver's state; Info bar is the last information received, with a log of the last 500 information messages, not every entry an active fault. Keep original indications and times, with mobile numbers, serials, addresses, positions and message content private. Do not install software, open a new session, send messages/reports, start tests, operate distress/SSAS controls, acknowledge alarms, log in/out, scan, issue commands, edit position/passwords/configuration, reset, update, unplug cables or move antennas. Preserve the installed safety system and refer persistent faults to the responsible operator or qualified service. Historical documentation does not establish present service availability or certification.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.
