English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItaliano

Your country is detected for each new visit. You can choose your country and language.

Satellite internet · International equipment

Thales MissionLINK 700

Read Dashboard or Alerts first, then Status → Service for detected satellites and signal bars. The quick-start guide calls for more than one available bar; bars alone are not proof that internet data is authorized. Observe an unobstructed sky view from a safe location, without touching or approaching the transmitting antenna. Record any SIM or service alert for the airtime provider.

Troubleshoot this model →Open official guide ↓

Confirm your model

An already installed MissionLINK 700 system using the terminal and portal shown in quick-start guide PN 3402174-1 Rev B. Confirm the label and firmware before following it. MissionLINK 200 and marine VesseLINK are separate products; do not assume identical menus, wiring or indicators.

How it connects

  1. Installed Iridium antenna Installed RF cable
  2. MissionLINK terminal Local network
  3. Authorized LAN or Wi-Fi device
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

Use your installed Wi-Fi network or an authorized computer on one of the three LAN ports. The separately marked WAN port is for an upstream network and is not the same connection. On the terminal network, open http://portal.thaleslink exactly; do not append .com. Use your current authorized login. Wi-Fi OFF alone does not prove satellite failure when using Ethernet.

Lights and messages

  • Let the normal startup finish. On this terminal, System flashing green means booting/busy. Satellite flashing green means acquiring; solid green indicates normal status, while solid blue specifically indicates satellite data passing. A red fault light needs the corresponding alert, not a guess from color alone.

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • Leave antenna installation, DC wiring and transmitting-terminal commissioning to qualified personnel. Do not alter Distress settings, expose account identifiers, install firmware or factory-reset a managed terminal as a trial. Do not use an emergency call to test it. Red critical faults or repeated registration failure belong with Thales and your airtime provider.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓