English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Receivers & equipment · International equipment · Model

Megasat HD 3 Combo V2

Match Megasat HD 3 Combo V2, article 2600012, to Version 1.1 May 2017; do not substitute HD 3 Kompakt V3, HD 4 Combo V2, HD 5 Combo or the earlier unsuffixed model. Observe an already-running satellite display only.

Confirm your model

Megasat HD 3 Combo V2 · Version1.1 May2017;article2600012. Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

How it connects

Match Megasat HD 3 Combo V2, article 2600012, to Version 1.1 May 2017; do not substitute HD 3 Kompakt V3, HD 4 Combo V2, HD 5 Combo or the earlier unsuffixed model. Observe an already-running satellite display only. LNB In is satellite; ANT In serves terrestrial/cable, so those modes and power settings are not interchangeable. Record the existing satellite/transponder and lock state; lock does not prove current programmes or entitlement. In the satellite Search screen, PWR is signal level in dBµV, STR is strength, CNR and MER describe different signal-quality measurements, BER is an error measure and QLT is quality; preserve units and comparison signs, not example values as universal limits. 22K and LNB Power Status describe existing tone/feed states, with 18 V horizontal and 13 V vertical, not evidence of a bad LNB or permission to change voltage. F2/F3/F4 change functions with the submenu, including voltage/consumption measurement, transponder/range control and automatic DiSEqC; do not press them as harmless status tests. Existing Hardware Ver. and Software Ver. identify the unit versions. Auto Standby has OFF/10/20/30-minute options; note the existing setting before blaming an unexpected stop. Factory reset deletes entered data; the physical Reset also resets factory settings. Do not change feed/tone/Unicable/userbands/motor/parameters, scan, move the dish, use angle examples, reset/update or handle powered cables/battery/internal parts for these observations. Preserve settings, saved data and ongoing work; qualified installers should plan safe fault inspection.

Before buying parts

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓