Applies to: Megasat HD 3 Combo V2 · Version1.1 May2017;article2600012
Work through these checks
01 · Megasat HD 3 Combo V2
Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
02 · HD 3 Combo V2 / LNB In / ANT In / PWR / STR / CNR / MER / BER / QLT / 22K / LNB Power Status / Hardware Ver. / Software Ver. / Auto Standby / Factory reset / Reset
Match Megasat HD 3 Combo V2, article 2600012, to Version 1.1 May 2017; do not substitute HD 3 Kompakt V3, HD 4 Combo V2, HD 5 Combo or the earlier unsuffixed model. Observe an already-running satellite display only. LNB In is satellite; ANT In serves terrestrial/cable, so those modes and power settings are not interchangeable. Record the existing satellite/transponder and lock state; lock does not prove current programmes or entitlement. In the satellite Search screen, PWR is signal level in dBµV, STR is strength, CNR and MER describe different signal-quality measurements, BER is an error measure and QLT is quality; preserve units and comparison signs, not example values as universal limits. 22K and LNB Power Status describe existing tone/feed states, with 18 V horizontal and 13 V vertical, not evidence of a bad LNB or permission to change voltage. F2/F3/F4 change functions with the submenu, including voltage/consumption measurement, transponder/range control and automatic DiSEqC; do not press them as harmless status tests. Existing Hardware Ver. and Software Ver. identify the unit versions. Auto Standby has OFF/10/20/30-minute options; note the existing setting before blaming an unexpected stop. Factory reset deletes entered data; the physical Reset also resets factory settings. Do not change feed/tone/Unicable/userbands/motor/parameters, scan, move the dish, use angle examples, reset/update or handle powered cables/battery/internal parts for these observations. Preserve settings, saved data and ongoing work; qualified installers should plan safe fault inspection.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.
