Confirm your model
TracPhone V3-HTS using original KVH 54-1270 Rev B, copyright 2018, not V3-IP, V30 or another HTS model. The ICM contains the modem and multimedia terminal adapter (MTA). Support or System Info → Hardware Information exposes antenna/ICM/modem identifiers and MTA MAC; keep those details private for support. The historical mini-VSAT and voice examples do not establish current service eligibility or account access.
How it connects
- V3-HTS antenna Tx/Rx RF + separate power/data
- V3-HTS ICM User Ethernet in installed profile
- Existing vessel LAN client
The original wiring diagram separates transmit RF, receive RF and antenna power/data paths between antenna and ICM; this is not a single-coax BGAN arrangement. The ICM’s router/WAP serves onboard devices through User Ethernet or configured Wi-Fi. Port roles depend on the installed network profile: Standard uses ports 1–4 for the high-speed LAN, whereas Static IP and Access Control reserve port 4 for the accessory LAN. Preserve the existing profile and wiring rather than swapping a client between ports as a test.
Lights and messages
- Keep CONTROL UNIT, ANTENNA and MODEM separate. Flashing green CONTROL UNIT is startup. Flashing green ANTENNA can be searching, waiting for modem communications or processing a software update; it is not one unique antenna fault. MODEM steady green is online, orange is offline, and red versus flashing red distinguishes lost modem communication from the documented internal-communication condition. Read the accompanying message before any action. The web page’s Line2 is always unavailable on this single-phone-line V3-HTS; it is not a second broken voice line.
A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.
Before buying parts
- The overview identifies vessel computers and the analogue phone as customer supplied. Voice Line1 is the documented phone connection, while Ethernet cables and an optional external WAP serve a different local-network purpose. The Standard example specifies straight-through CAT5 or better and permits a separate WAP/bridge-mode router to supplement coverage. A configuration change resets the built-in WAP to Off, so a lost Wi-Fi network after a change is useful history, not grounds to buy another antenna. Do not change security, port roles or the vessel profile to diagnose it.
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓