Confirm your model
KING-DOME 9630 / 9630-LP · 1305 Rev E · AutoScan · printed pages 7–19. Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
How it connects
Match 9630 or 9630-LP AUTOSCAN to section 3 of the KING original 1305 Revision E, choosing serial 169999 and lower or 170000 and higher before interpreting the controller. The older branch documents a 99-to-00 countdown followed by OH, a flashing 77 during scan and automatic controller shutoff after two minutes; do not apply that display sequence to the newer branch. The newer page describes startup codes followed by steady elevation, then a flashing clock position during an existing scan. These AutoScan instructions rely on watching the receiver's signal meter and do not make this a 9702 automatic-lock controller. Record the actual display, serial range and receiver-screen symptom before changing anything. A visible receiver menu with missing programming is different evidence from a dead TV input. Do not start repeated motion, enter service-keypad codes, recalibrate, open the dome, climb onto a roof or disturb powered coax as an initial test. Keep identifiers private. The linked KING-authored service original is held by RV Tech Library, not the manufacturer; its old transponder/provider examples do not guarantee current broadcast or receiver compatibility.
Before buying parts
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓