Confirm your model
Kannad Marine SafeLink SOLO V2 · Z424 · DOC18012 Revision C00; revision-history entry 002.2 dated 26-11-2021 is separate; V2 model Z424 only. Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
How it connects
Match SAFELINK SOLO V2 model Z424 to DOC18012 Revision C00, not an older SOLO or another Type Z42x product. Interpret only previously recorded, authorized GNSS test results. Slow flashes mean acquisition in progress; a series of long flashes means a fix was obtained and counts remaining GNSS tests, not satellites. One long flash then switch-off can mean no tests remain, not a successful fix or by itself a GNSS fault. With no fix after five minutes, that test fails and flashing stops. These test patterns must not be applied to active emergency indications. A recorded fix does not prove rescue acknowledgement, delivery or present serviceability. An already broken anti-tamper seal cannot be reset by the user. Keep existing model, time and observations private; redact identifiers and positions. Do not pull the cap, deploy the antenna, activate, cancel, test, press controls, reprogram, reset, open or wet the beacon. Seek authorized service for physical damage; do not recreate indications.
Before buying parts
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓