English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine / Detailed guide

Kannad Marine SafeLink SOLO V2 · Z424 · Exact manual and safe first checks

Kannad Marine SafeLink SOLO V2 · Z424 · DOC18012 Revision C00; revision-history entry 002.2 dated 26-11-2021 is separate; V2 model Z424 only

Applies to: Kannad Marine SafeLink SOLO V2 · Z424 · DOC18012 Revision C00; revision-history entry 002.2 dated 26-11-2021 is separate; V2 model Z424 only

Work through these checks

  1. 01 · Kannad Marine SafeLink SOLO V2 · Z424

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · SOLO V2 / Z424 / DOC18012 / C00 / GNSS

    Match SAFELINK SOLO V2 model Z424 to DOC18012 Revision C00, not an older SOLO or another Type Z42x product. Interpret only previously recorded, authorized GNSS test results. Slow flashes mean acquisition in progress; a series of long flashes means a fix was obtained and counts remaining GNSS tests, not satellites. One long flash then switch-off can mean no tests remain, not a successful fix or by itself a GNSS fault. With no fix after five minutes, that test fails and flashing stops. These test patterns must not be applied to active emergency indications. A recorded fix does not prove rescue acknowledgement, delivery or present serviceability. An already broken anti-tamper seal cannot be reset by the user. Keep existing model, time and observations private; redact identifiers and positions. Do not pull the cap, deploy the antenna, activate, cancel, test, press controls, reprogram, reset, open or wet the beacon. Seek authorized service for physical damage; do not recreate indications.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.