English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine · International equipment · Model

Intellian i6 marine TV antenna

i6 variants, Ku-band coverage, receiver/MIM switching and official manuals.

Confirm your model

Read the suffix: i6, i6P, i6PE and i6W have separate downloads. WorldView applies to i6W; do not infer it from an unmarked i6.

How it connects

  1. i6 antenna RF1 to ACU ANT. RF1
  2. Intellian ACU ACU RECEIVER to receiver RF input
  3. TV receiver
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

In the original i6/i6P/i6PE V2.0 drawing, antenna RF1 feeds ANT. RF1 on the ACU; the ACU RECEIVER port feeds the satellite receiver. The ACU powers and controls the antenna. In the documented dual-receiver arrangement, the receiver configured for two satellites determines the tracked satellite; the other receiver is limited to channels on that satellite.

Lights and messages

  • The normal ACU sequence distinguishes INITIALIZE ACU, INITIALIZE ANTENNA, SEARCH and TRACKING. ANTENNA IS UNWRAPPING is a documented cable-management state followed by tracking in the example. Record the full displayed state and satellite name when reporting a persistent problem.
  • In an already available Aptus dashboard, GPS flashes green when correct GPS input is received. Software Information and Product Information identify antenna and ACU versions, models and serial numbers separately. A red Diagnostic Error Report button means the system has received an error; read the existing report rather than treating GPS reception as TV reception.

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • The V2.0 supplied-parts list names a 15 m antenna-to-ACU RG6 cable, a 3 m ACU-to-receiver RG6 cable, ACU brackets and a PC serial cable. Receivers and TVs are separate purchases. More receivers require a suitable active multiswitch; this is not approval for a passive splitter. Dish/Bell switching is referred to the separate MIM manual, not established by this parts list.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓