English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite internet · International equipment · Model

Cobham EXPLORER 510

Check local access, registration and the data connection separately.

Confirm your model

EXPLORER 510 with revision-A getting-started guidance; not 710. Confirm firmware and current airtime terms.

How it connects

  1. BGAN satellite network Registration
  2. EXPLORER 510 / authorized SIM Local access; separate data session
  3. Configured WLAN / local device
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

The original 98-143082-E manual describes WLAN and a USB Host interface, not a built-in Ethernet socket. A wired computer uses the supplied EXPLORER USB-to-LAN Converter Cable between USB and its LAN cable. The local browser interface is separate from satellite registration and chargeable data; 192.168.0.1 is only the unchanged default. Existing USB settings and a thermal limit can affect the converter without proving an RF fault.

Lights and messages

  • Read the named Status and WLAN indicators separately. On Status, constant yellow is a warning and constant red is an error; these override other indications and point to current messages in the web interface. Blue flashing alone indicates software upload, while blue flashing together with WLAN indicates safe mode. Preserve an upload already in progress rather than treating every flashing light as the same fault.
  • For WLAN, steady yellow means ready with factory-default configuration; steady green means ready with customized configuration. Slow green flashing means WLAN registrations exist, while green traffic flashing concerns local receive/transmit activity. In the browser, a crossed grey WLAN or USB icon means that interface is disabled; blue means enabled. None of those local states is a satellite data-session receipt.

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • Revision E lists the terminal, AC/DC adapter, USB-to-LAN Converter Cable, EXPLORER softbag and getting-started booklet as supplied. The specified converter is a real interface accessory, not an interchangeable charging cable or an assumed generic USB Ethernet adapter. Its documented 1.0 A USB requirement can be overridden to 0.5 A by high temperature. Preserve the exact thermal message and existing settings for support; this is not an instruction to change current limits or replace the supply.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓