English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine / Detailed guide

Teleco Flat Sat Easy BT 65 / 85 · Exact manual and safe first checks

Flat Sat Easy BT 65/85 · Smart/Skew options · 23_09_2019 · SAT / PARK / BLUETOOTH

Applies to: Flat Sat Easy BT 65/85 · Smart/Skew options · 23_09_2019 · SAT / PARK / BLUETOOTH

Work through these checks

  1. 01 · Teleco Flat Sat Easy BT 65 / 85

    Match the model, product code and manual edition on this page. Photograph existing connections without changing them. First separate TV input and standby problems from missing satellite reception. Preserve the channel list and antenna settings; do not factory-reset, flash software, rescan or rewire as a first check.

  2. 02 · SAT OK / PARK / NO SAT / EL / AZ / 9

    Match Flat Sat Easy BT 65/85 to the Dutch manual dated 23_09_2019; keep Smart/Skew options separate. This is not the 2017 non-BT controller or a newer 70/90 system. SAT OK means satellite acquisition; it does not prove channel authorization. The SAT light may go dark in normal standby. While parked with a clear movement path, PARK folds the antenna and the display shows OK when closed; confirm stow from ground level before driving. Record NO SAT, EL, AZ, 9, No Antenne or No LNB exactly. Do not force movement, climb onto the roof or change wiring.

  3. 03 · BLUETOOTH

    Separate Bluetooth control from satellite reception. This manual allows four paired phones but only one connected phone at a time. A steady BLUETOOTH light means a phone is connected; another phone cannot connect or pair until that connection ends. Slow blinking indicates pairing availability; rapid blinking for about three seconds indicates a full pairing list. Check the existing phone's Bluetooth and nearby connection first. Do not erase all pairings, update firmware or change Smart/DiSEqC settings as an initial test.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything. Flat Sat Easy BT 65/85 · Smart/Skew options · 23_09_2019 · SAT / PARK / BLUETOOTH

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.