English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItaliano

Your country is detected for each new visit. You can choose your country and language.

Satellite TV · Europe

HD-S 210

Free-to-air HD satellite receiver with HDMI, SCART and USB media playback. LAN is for software updates, not ISIO internet apps.

Troubleshoot this model →Open official guide ↓

Confirm your model

Read HD-S 210 on the label. This page links the German V4 manual, September 2026, and a separate Dutch V3 manual. Do not substitute instructions for HD-S 261 or DIGIT ISIO.

How it connects

  1. Dish/LNB or documented single-cable installation Satellite coax → LNB-IN
  2. HD-S 210 receiver Receiver video output → TV input
  3. TV on connected HDMI or SCART input
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

Disconnect mains before cable changes. Single-cable SatCR requires the installed ZF channel/frequency; keep them recorded. LOOP OUT is not a promise of independent tuning for another receiver.

Lights and messages

  • MENU confirms the TV picture path; receiver “Kein Signal” points to a different diagnostic branch.
  • Sound without picture can be a selected radio programme; check TV/Radio.

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • Use a compatible HDMI/SCART cable and approved power arrangement. Do not buy a CAM, network adapter or signal amplifier expecting unsupported features.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓