Confirm your model
Family: SRT 7007 / SRT 7008 / SRT 7010.
How it connects
For a blank TV, select the connected HDMI or SCART input first. Disconnect receiver power before handling cables. Preserve installed LNB, switch and SatCR user-band settings; ask the installer if these are unknown.
Lights and messages
- GREEN changes output resolution in viewing mode. If a resolution change loses the picture, do not confirm it: the manual says the previous setting returns within ten seconds. GREEN has other functions inside menus.
- Where recording software is installed, the manuals restrict channel changes during recording to the same transponder, using channel up/down or the channel list. A blocked channel change can therefore be a recording limitation rather than reception failure.
A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.
Before buying parts
- Back up storage before formatting: formatting erases data. Factory reset removes channels, timers and personal settings. Use only exact-model update files and never interrupt an update. Do not open the receiver.
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓