English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine · Europe · Family

SELFSAT SNIPE 3 / 3R White Line

Read HOME and Lock separately. Startup position checking, satellite search and a returned-to-HOME antenna are different states; a lit satellite-selection LED is not a channel-delivery result.

Confirm your model

SNIPE 3 / SNIPE 3R White Line with the wired controller in this OEM manual. The cover reads ver 1.0 although the download filename says v1.1. Match the controller; do not apply these indicators to SNIPE 3 BT, SNIPE 4 or PRO/MAX.

How it connects

  1. Automatic flat antenna 20-pin control + signal
  2. Wired controller STB coax
  3. Installed TV receiver
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

Two separate paths join the main antenna to the wired controller: the 20-pin controller cable and the 7 m signal cable. The controller then feeds the TV receiver through the 1.5 m STB cable. The optional twin-output connection is a separate extra path. Read the actual cable labels; preserve the supplied unmodified cables and leave installation work to the installer with power isolated.

Lights and messages

  • At startup, some LEDs encode the firmware version; a selected satellite LED then shows the target, not reception. HOME blinking before search is a position check. Lock blinking means satellite search and steady Lock means the target was found. During return, HOME blinking means movement and steady HOME means the home position has been reached. Confirm physical travel readiness safely from the ground; do not test automatic return by driving.

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • The kit distinguishes the wired controller and its bracket from the handheld remote, which is included with 3R only and must be used with the SNIPE3R controller. A manufacturer power adaptor is an optional separate item. Match the installed controller and output option before buying accessories; a remote from another SNIPE family is not established compatible by this manual.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓