Confirm your model
Satlink WS-6933 · Match the exact hardware, tuner standard and manual. Keep LNB feed and TV/AV display connections distinct. Preserve saved channel plans and transponders.
How it connects
On WS-6933, 13V, 18V and 22KHZ indicate LNB control, not signal lock. Record LOCK and the numeric quality display separately. System Setup starts with hardware serial and software version. USB connects to a PC; it is not HDMI or another satellite input. Match the pictured panel before using this manual. Use only an already safe, installed measuring point at ground level. Do not connect to an unknown powered feed, climb or move a dish. Stop for damaged cables, unexpected voltage or short-circuit warnings; ask a qualified installer or meter service. Do not bypass protection, change LNB power, DiSEqC/SCR, motor settings, calibration or firmware, or reset to test.
Before buying parts
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓