Confirm your model
Match MXL023 VuQube II and the control panel pictured in 9111200 Issue 3A/22216 Rev D, not MXL005’s directional remote or a later Q/controller edition.
How it connects
Match MXL023 VuQube II and the control panel pictured in 9111200 Issue 3A/22216 Rev D, not MXL005’s directional remote or a later Q/controller edition. COAX flashing during the initial connection check then steady means the antenna/control link is ready, not that a satellite is locked. In the fault table, ERROR with SAT SCAN flashing while COAX stays steady points to an unsuccessful satellite search; ERROR with COAX flashing instead points to the F-to-F antenna/control cable path. Record the exact combination before inspecting anything. A steady SAT SCAN light with no TV picture calls for a separate check of receiver/TV input and selected satellite, not immediate motor work. SAT SCAN off with dim COAX can be normal standby while reception continues; waking from standby alone does not require rescanning unless the antenna moved. Preserve the existing setup; no reset, firmware, cable swap under power, roof climb or dome opening.
Before buying parts
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓