English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

RV & marine · International equipment · Model

KVH TracPhone V11-HTS · 54-1293 Rev C

Match KVH TracPhone V11-HTS to 54-1293 Rev C, copyright 2020; do not transfer V7-HTS, V3-HTS or V11-IP settings. The original documents a complete Ku-band/C-band antenna and ICM system, not a promise of current service, coverage or airtime terms.

Confirm your model

KVH TracPhone V11-HTS · 54-1293 Rev C · 54-1293RevC;copyright2020notprovenpublicationdate/currentfirmware. Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

How it connects

Match KVH TracPhone V11-HTS to 54-1293 Rev C, copyright 2020; do not transfer V7-HTS, V3-HTS or V11-IP settings. The original documents a complete Ku-band/C-band antenna and ICM system, not a promise of current service, coverage or airtime terms. Read only already-visible My VSAT Status. Connection Status describes the built-in modem connection; Antenna State separately describes Tracking, Searching, Cable Unwrap or other antenna states. Beam identifies the selected Ku-band or C-band context, so keep it with the recorded satellite, SNR and time instead of treating every poor connection as the same RF fault. Where no-transmit zones exist, Transmit Enabled green means the antenna is outside a zone, Transmit Disabled orange means a zone is enforced, and Transmit Enabled red means the zones are being ignored. Red here is not permission to disable protection or a generic weak-signal indicator; do not change zones. Warning 404 is internal cable unwrapping, which this edition says should normally finish within one minute; record its duration without interrupting antenna motion. Warning 413 means waiting for a GPS fix, while 414 means backup GPS position is in use, not necessarily no position. Warning 417 concerns a configured tracking-avoidance zone and possible degradation, distinct from no-transmit enforcement. Preserve the full message and whether the unit labels it Warning or Error; reference-loss, incompatible components and missing position are not one interchangeable diagnosis. Keep serials, software versions and IP addresses private. If an authorized remote support session is already active, preserve operation and change no settings. Do not log in afresh, start diagnostics, reset, update, alter zones/bands/network settings, move the antenna or handle powered cables. Qualified KVH-trained marine service should plan further diagnosis from this exact original and the installed hardware.

Before buying parts

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓