Confirm your model
Match the antenna and ACU labels to the original 2015EF-UM1016-V2_0 manual. Its Product Information view reports both models and serial numbers, while Software Information reports their firmware versions. Record those separately. The i4P has automatic LNB skew adjustment; the manual distinguishes it from i4, so do not apply a manual-skew procedure merely because the radomes look alike. This does not cover i4 Inland.
How it connects
- Marine TV antenna Antenna RF1 → ACU ANT.RF1
- Antenna Control Unit / ACU ACU receiver output → receiver RF input
- Installed TV receiver
In the manual’s single-receiver arrangement, antenna RF1 goes to ACU ANT.RF1, and the ACU receiver output feeds the TV receiver. A dual-receiver installation adds a separate antenna RF2 path; the receiver through the ACU determines the tracked satellite, so the other receiver is limited to channels available on that satellite. Confirm which installed receiver fails before changing anything. Keep RF work with the installer and the power safely isolated.
Lights and messages
- Read the ACU’s complete sequence: INITIALIZE ACU establishes control communication, INITIALIZE ANTENNA initializes the antenna, SEARCH looks for the selected satellite, and TRACKING reports it located. Record the selected satellite name as well as the word TRACKING; a tracked satellite does not by itself confirm the receiver’s channel package.
- ANTENNA IS UNWRAPING is the manual’s winding/unwinding state inside the antenna, followed by a return to tracking. It is not an instruction to open the radome or pull the installed cable. Record whether tracking returns and keep people away from the moving antenna.
- In the documented PC status view, a red square beside Diagnostic Error Report means an error report is available. Preserve its exact items and the antenna/ACU versions for support. Signal-bar color is compared with configured thresholds; do not lower those thresholds just to make a status bar look healthy.
A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.
Before buying parts
- The original kit lists 15 m antenna-to-ACU and 3 m ACU-to-receiver RF cables; receivers are not supplied. A multi-receiver layout requires a suitable multiswitch, not an arbitrary splitter. Match the actual regional LNB, receiver and installed layout with the qualified supplier before ordering; this manual is not current channel or subscription approval.
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓