English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite internet · International equipment · Model

Hughes 9450-C11

Vehicle BGAN terminal with a Class11 tracking antenna; exact base-model interfaces and original documentation.

Confirm your model

Match 9450-C11 on the terminal and its antenna. This page describes the base 9450-C11 datasheet H44354 (January2023), not 9450L/LW/TW/E or C10.

How it connects

  1. C11 antenna Installed RF cable
  2. 9450-C11 IDU Ethernet
  3. Ethernet client
Simplified signal path, not an installation or rewiring diagram. Follow the linked manual for power connections, grounding and your exact hardware revision.

The base C11 datasheet lists four PoE Ethernet ports, WLAN, two RJ11 ports (voice/fax) and ISDN. Installation is for authorised personnel; do not change powered RF wiring to diagnose a client.

Lights and messages

  • Separate the four IDU lights: Power green means the IDU is on; Network Registration green means attached to BGAN. GPS flashes while acquiring a fix and becomes steady with a valid fix, then goes off after registration as the Network light turns on. A dark GPS light after registration is therefore not, by itself, a failed GPS receiver.
  • Read the two lights at each Ethernet port separately from satellite status. The bicolor light shows link in green, a powered PoE device in red and both together in orange; the other green light indicates traffic. A red port light can therefore mean PoE power, unlike the separate red H/W Fault light.
  • A red H/W Fault light is the IDU fault indication; the manual’s examples include internal-board fault, no antenna communication and no GPS. Preserve the Web UI’s exact state and errors for the installer instead of selecting a replacement antenna from this light alone. Do not disturb powered RF wiring.

A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.

Before buying parts

  • Match Class11 antenna and approved mounting/cable parts with the installer. A C10 mount or variant-specific peripheral is not automatically interchangeable.

These are compatibility notes and official reference links. Confirm the fault and exact part before buying.

Model-specific parts: start with the official source

Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.

Check the model and official instructions ↓