Confirm your model
Furuno FELCOM18 · OME-56740-G2 · 2018-05-16
How it connects
Use the FELCOM18 manual OME-56740-G2, dated 16 May 2018; do not substitute FELCOM19 or FleetBroadband instructions. Retuning followed by SYNC(NCS) indicates synchronization for EGC reception, not proof of successful ordinary-message delivery. Read Login and Current State separately; IDLE can be normal. Record the exact CAUTION text, time, GPS Status, DCE Memory and Antenna Power Supply status. Send Level is normally zero during reception; do not transmit just to change it. Preserve messages and settings. Do not start PV, distress or SSAS tests, clear alarms or reset the installation as diagnosis. Follow the qualified ship operator’s procedure. The archived manual does not confirm present service or compliance.
Before buying parts
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓