Confirm your model
Amiko MIRA WiFi · Exact manual and safe first checks. LNB IN → DVB-S/S2 · HD OUT → HDMI · S/PDIF · TV → SCART · IR IN · DC12V
How it connects
LNB IN → DVB-S/S2 · HD OUT → HDMI · S/PDIF · TV → SCART · IR IN · DC12V. INFO → INFO → RED. Satellite reception uses LNB IN; this model’s pictured connection panel does not provide the combo model’s separate RF IN. Compare the receiver menu with the TV’s own no-signal message. In normal viewing use INFO to record the service and transponder details before changing anything. A scrambled-channel message is separate from loss of reception. Check TV/Radio, satellite and favourite filters before assuming channels were deleted. Where fitted, RS232 is a service connection, not a TV output. Preserve antenna settings and software version; do not reset, scan, format storage or load firmware as a first step. Match the model, product code and manual edition on this page. Photograph existing connections without changing them. First separate TV input and standby problems from missing satellite reception. Preserve the channel list and antenna settings; do not factory-reset, flash software, rescan or rewire as a first check.
Before buying parts
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓