Confirm your model
Match 700HD on the receiver label. This page does not cover 700HD mini or 750HD. Record software version and the exact message before changing settings.
How it connects
- Installed dish cable LNB IN
- CryptoBox 700HD HDMI or TV SCART
- Television
Connect the installed satellite lead to LNB IN, not LOOP OUT. Select the matching TV input for HDMI or SCART. Disconnect receiver power before changing accessible LNB connections. Ethernet provides networking; it does not replace the satellite feed.
Lights and messages
- The front display shows channel information and the local time in standby. Separate POWER and SIGNAL indicators are illustrated in the manual. Do not interpret an illuminated power indicator as proof of satellite reception.
A light is one clue, not a complete diagnosis. Match the indicator’s label and the on-screen message.
Before buying parts
- USB recording and timeshift use attached storage. Preserve recordings before formatting or resetting. Match firmware to the exact model and official source; do not install 700HD mini firmware. Battery quantity and type are not established by this page.
These are compatibility notes and official reference links. Confirm the fault and exact part before buying.
Model-specific parts: start with the official source
Confirm the exact model and part number with the manufacturer or provider before buying any replacement part or accessory.
Check the model and official instructions ↓