Applies to: Kathrein UFD 580/580S twin-DVR family · 936.2576/B/0605/ZWT; printed publication date unconfirmed
Work through these checks
01 · Kathrein UFD 580/580S twin-DVR family
Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
02 · UFD 580/580S / 936.2576/B/0605/ZWT / h*** / REC 1 / REC 2 / Factory Set / #1 & #2
For UFD 580/580S use printed code 936.2576/B/0605/ZWT; publication date is unconfirmed. Observe existing state only. The red standby lamp differs from red flashes acknowledging remote commands; neither establishes satellite lock. “Weak signal or no signal” can concern reception, settings or an absent transponder, not proof of a failed disk. Note whether one or all channels are affected. Twin-tuner viewing and recording choices depend on existing #1/#2/Loop/#1 & #2 feed configuration; do not rearrange it as a test. During playback h*** denotes a recording number, while REC 1 or REC 2 remains displayed if recording continues. A full disk stops recording; this alone does not establish a tuner fault. Factory Set restores settings that may not suit the installed system. Preserve settings and recordings; do not reset, rescan, update, delete, format, make test recordings, rewire, power-cycle or open. This historical original does not promise present broadcasts, tvtv EPG or subscription compatibility.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.
