English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite TV / Detailed guide

Metronic TouchBox HD3 (441374) · Exact manual and safe first checks

Metronic TouchBox HD3 (441374) · 20w08 cover code; publication date unconfirmed

Applies to: Metronic TouchBox HD3 (441374) · 20w08 cover code; publication date unconfirmed

Work through these checks

  1. 01 · Metronic TouchBox HD3 (441374)

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · TouchBox HD3 / 441374 / 20w08 / HBPVR / .mts / FAT32

    Match TouchBox HD3 441374 to the 112-page Metronic original marked 20w08; that code is not a confirmed publication date, and other TouchBox models are outside this scope. The front indicator is red in standby and green when on; green alone does not prove satellite reception. On an existing signal screen, the upper bar is quality and the lower bar is level; high bars alone can belong to another satellite. Automatic standby after three hours without use is not by itself a hardware failure. USB recordings are stored in HBPVR as .mts files; FAT32 can split a long recording across several files, so several files alone do not prove corruption. Factory reset loses personalised channels and radio settings. Do not reset, scan, format, delete, make test recordings, update software, move the antenna, change feeds or cycle power. Do not open the receiver.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.