English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Receivers & equipment / Detailed guide

Televes H60 · Exact manual and safe first checks

Televes H60 · 01031052_002_EN;168pages;productionfooter2013 notclaimedpublicationdate

Applies to: Televes H60 · 01031052_002_EN;168pages;productionfooter2013 notclaimedpublicationdate

Work through these checks

  1. 01 · Televes H60

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · H60 / Vext / SHORT CIRCUIT / LIMIT EXCEEDED / No DiSEqC. Vdc off / Quality Profiles / SATELLITE ONLY / SEARCHING

    Match H60 to the Televes original, 168 pages, document code 01031052_002_EN; group its listed references 5960/596003/596005 as one family, without promising every option. The visible 2013 production footer is not a declared edition date. Record existing band, channel plan and readings without changing them. Vext warns that voltage is already present in the coax; SHORT CIRCUIT and LIMIT EXCEEDED indicate a short or excessive load, with automatic supply retries. Stop and safely isolate powered feeds before accessible connection inspection; do not repeatedly reconnect live. No DiSEqC. Vdc off describes a command attempted with external-unit power off, not permission to enable it. Quality Profiles set indicator limits, so note the existing profile and distinguish level from quality. SATELLITE ONLY indicates the identification function requires satellite analyser mode; SEARCHING is search progress, not a hardware fault. Existing satellite names depend on broadcaster transport-stream identifiers and can be wrong. No active searches, motor/dish tests, voltage/profile/configuration changes, resets, updates, calibration, fuse or battery work; never interrupt a known update. Protect identifiers; historical examples do not guarantee current compatibility. This Televes-authored original is linked by the TEquipment distributor archive to its document CDN, not a verified manufacturer download endpoint.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.