English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite TV / Detailed guide

TELESTAR digiHD TS 10 · Exact manual and safe first checks

TELESTAR digiHD TS 10 · German original, 56 pages; printed Stand: Dezember 2018.

Applies to: TELESTAR digiHD TS 10 · German original, 56 pages; printed Stand: Dezember 2018.

Work through these checks

  1. 01 · TELESTAR digiHD TS 10

    Match TELESTAR digiHD TS 10 to its German 56-page TELESTAR original in the gzhls archive, with printed Stand: Dezember 2018; not TS 6 or a firmware date. Observe only already visible safe states. Three-hour Auto-Standby is the documented factory default, subject to existing settings (p 29); timing alone is not a fault diagnosis. Existing Version identifies hardware/software (p 36), not live reception or the installed version from the manual date. Programmliste auf USB speichern and loading a .bin list are active backup/restore transfers (p 50), not status checks. Keep TS 6 LAN/weather instructions separate; do not enter update or factory-reset controls. Preserve channels, timers, PIN and files. Do not press controls, scan, change settings or feed, move the antenna, reset, format, update, record or insert/remove media as tests. No battery, powered-cable, internal or roof work; stop for damage and use qualified service with safe isolation. Do not interrupt any ongoing update or transfer. Historical documentation does not guarantee current services or compatibility.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Match TELESTAR digiHD TS 10 to its German 56-page TELESTAR original in the gzhls archive, with printed Stand: Dezember 2018; not TS 6 or a firmware date. Observe only already visible safe states. Three-hour Auto-Standby is the documented factory default, subject to existing settings (p 29); timing alone is not a fault diagnosis. Existing Version identifies hardware/software (p 36), not live reception or the installed version from the manual date. Programmliste auf USB speichern and loading a .bin list are active backup/restore transfers (p 50), not status checks. Keep TS 6 LAN/weather instructions separate; do not enter update or factory-reset controls. Preserve channels, timers, PIN and files. Do not press controls, scan, change settings or feed, move the antenna, reset, format, update, record or insert/remove media as tests. No battery, powered-cable, internal or roof work; stop for damage and use qualified service with safe isolation. Do not interrupt any ongoing update or transfer. Historical documentation does not guarantee current services or compatibility.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.