Applies to: TeleSat S65 / S85 · 01 / 08 / 2017 · ON/OFF (3) / Parking (2)
Work through these checks
01 · Teleco TeleSat S65 / S85
Match the model, product code and manual edition on this page. Photograph existing connections without changing them. First separate TV input and standby problems from missing satellite reception. Preserve the channel list and antenna settings; do not factory-reset, flash software, rescan or rewire as a first check.
02 · ON/OFF (3) / (2) / ON / SAT / ER1 / ER2 / ER3 / ER9
TeleSat S has separate power (3) and parking (2) buttons: ON/OFF can leave the antenna where it is. Use the documented parking control only while stationary with its movement path clear, then confirm full stowage from the ground before travel. During search the selected satellite LED flashes and ON appears; SAT with a steady LED means acquisition. Record ER1 (no satellite), ER2 (elevation), ER3 (rotation) or ER9 (startup) exactly; do not reset or keep retrying a blocked motor.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything. TeleSat S65 / S85 · 01 / 08 / 2017 · ON/OFF (3) / Parking (2)
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.