Applies to: SAILOR800/900 VSAT · original98-133966-G3 family · 98-133966-G3 /24February2014;software1.48 document scope
Work through these checks
01 · SAILOR800/900 VSAT · original98-133966-G3 family
Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
02 · Power / Logon / Fail/Pass / TRACKING / SAFE MODE / Error / Warn / Set / Clr / One
For the original SAILOR 800/900 VSAT Ku-band family, use Cobham SATCOM Technical manual 98-133966-G3, release date 24 February 2014, 376 PDF pages, intended for software 1.48; this does not prove installed software. The 2013 cover production stamp is not the edition date. This supplier-hosted manufacturer original covers the original 800/900 configurations, including 900 Var A/Var B, not undocumented later editions, High Power or Ka/GX systems or a second antenna; optional modems, software and components earn no separate model credit. Observe only existing authorized ACU displays. Power steady green means power supply OK, steady red a supply failure. Logon flashing green can mean searching, identifying, or carrier lock with TX enabled by the modem; steady green means satellite link established, not proof of application internet access. Fail/Pass flashing green indicates an already-running POST or PAST, flashing red an active BITE failure or warning, steady red a fault preventing operation, and steady green no faults in this table. Existing TRACKING is not permission to transmit. Do not approach or open the moving/radiating ADU. Do not initiate tests, calibration, pointing, transmission, profile or blocking-zone changes, firmware work, reboot or reset; do not change power or cabling, and do not perform battery work. SAFE MODE has several possible causes, including communication loss or excessive ship motion; do not defeat it. Read existing event severity and state separately: Error means stopped, Warn means running but requiring attention; Set is active, Clr is no longer active, and One is an event from which the system recovered. These are state descriptions, not commands to clear or acknowledge anything. Preserve dated redacted existing evidence only; do not generate, download or send diagnostic reports as a first test. Escalate damage for qualified safe isolation before cable inspection. Historical hardware and software documentation guarantees no current network, modem, service or regulatory compatibility.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.
