Applies to: SAILOR 100 Satellite TV · 98-136311-A;21September2012
Work through these checks
01 · SAILOR 100 Satellite TV
Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
02 · 98-136311-A / ACU connection / READY / TRACKING / BLOCKING ZONE / TV Ready / Fail/Pass / POST / PAST
Match SAILOR 100 Satellite TV to 98-136311-A dated 21 September 2012, not the SAILOR 100 GX communications terminal. Read only existing ACU and Control Panel indications; ACU connection: OK shows the panel connection, not successful TV reception. READY means no satellite profile is selected; TRACKING means satellite tracking, not channel entitlement. BLOCKING ZONE refers to the configured zone and does not uniquely diagnose a physical obstruction. A dim ACU display after an hour is documented behavior, not proof of lost power. TV Ready steady green means tracking and off means not tracking. Distinguish Fail/Pass steady red, a fault preventing operation, from flashing red, an active BITE failure or warning; flashing green means POST or PAST is already in progress, not an instruction to start a test. Steady green means no reported faults, not a guarantee of working channels. Preserve the full existing event text and timing: notifications can be earlier events and are cleared after 24 hours; an asterisk marks a changed event list and > marks text longer than the display, neither is itself a fault code. Application and ACU software versions are separate; keep IP addresses and serial numbers private. Activating profiles moves the antenna, resets restart it and tests change operation. Do not activate profiles, reset, update, start tests, move the antenna or handle powered cables. Preserve working settings and ask qualified service to plan safe diagnosis if the recorded problem persists.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.
