Applies to: PROMAX HD RANGER / HD RANGER+ · English original · 0 MI1914 · v1.6 · 2013-02 · software 6.0
Work through these checks
01 · PROMAX HD RANGER / HD RANGER+
Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.
02 · LNB Drain / SHORTCIRCUIT
For HD RANGER / HD RANGER+ only: record the existing band, channel/frequency and any already-visible LNB Drain voltage/current without changing settings. DRAIN indicates current to the external unit, not satellite lock. The manual describes SHORTCIRCUIT with a beep, withheld supply and the instrument automatically rechecking every three seconds while the problem persists: stop this passive check and record the warning for the installer; do not repeatedly reconnect or change voltage. Configured automatic Off can explain shutdown after inactivity, but timing alone does not prove a defect. Do not scan, reset, update, send DiSEqC commands or transfer/delete installation data. This does not cover Neo, Eco, UltraLite or mini, or prove current compatibility.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.
