English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite internet / Detailed guide

Norsat WAYFARER 1.2m Ku auto-acquire fly-away · Exact manual and safe first checks

Norsat WAYFARER 1.2m Ku auto-acquire fly-away · DOC-000848 footer: Rev A, 10/2019; page 5 revision history extends through D, 2019-10-28; discrepancy retained

Applies to: Norsat WAYFARER 1.2m Ku auto-acquire fly-away · DOC-000848 footer: Rev A, 10/2019; page 5 revision history extends through D, 2019-10-28; discrepancy retained

Work through these checks

  1. 01 · Norsat WAYFARER 1.2m Ku auto-acquire fly-away

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · Remote / Modem / Commands Sent Too Frequently / Targeting Error / GPS

    Match WFA120KU to DOC-000848: its footer says Rev A 10/2019 while the revision history reaches D, 28 October2019; preserve that discrepancy. Do not substitute WFA100KU or Ka wiring: this platform has separate Remote and Modem RJ45 ports and an active Tx input. Observe only existing displays. Commands Sent Too Frequently concerns server command load, not proof of weak satellite reception. Targeting Error can involve almanac data, line of sight, GPS position or achievable orientation; it does not uniquely identify a motor failure. An already open Status screen distinguishes angles, limit switches, GPS and compass. GPS blinking means no position lock, steady means locked, not internet service. Preserve the exact message/profile privately. Do not retry commands, approve acquisition, change profiles or limits, calibrate, move hardware, open the ACU, swap live cables, reset or power-cycle merely to clear an alarm. Factory reset affects limit-switch and encoder data. Qualified staff should compare the installed platform while preserving traffic and RF/motion safety.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.