Applies to: Fuba ODS 400 · Original German ODS 400 user manual; publication date not established
Work through these checks
01 · Fuba ODS 400
Match the model, product code and manual edition on this page. Photograph existing connections without changing them. First separate TV input and standby problems from missing satellite reception. Preserve the channel list and antenna settings; do not factory-reset, flash software, rescan or rewire as a first check.
02 · ODS 400 / Antennenanschluss / Single (loop) / Dual (gleich) / Dual (unterschiedlich) / Version / FWS 100 / Werkseinstellungen
Match ODS 400 and its original German twin-tuner manual. Record Antennenanschluss before interpreting recording limits: Single (loop) restricts simultaneous viewing/recording to one transponder; Dual (gleich) and Dual (unterschiedlich) describe different two-feed installations. Do not rewire or change the mode to force a second channel. The manual explicitly says the front card slot is inactive; inserting a subscription card is not a repair. Read Version and existing network type; Wi-Fi requires the documented FWS 100 adapter. Preserve recordings and lists: Werkseinstellungen loses personal settings, and formatting erases storage. Do not reset, format, update or overwrite LNB/user-band settings as a first check.
When to stop and get help
Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.
What to tell support
Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.
Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.