English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite internet / Detailed guide

Cobham EXPLORER 8000 series 8100/8120 Drive-Away VSAT family · Exact manual and safe first checks

Cobham EXPLORER 8000 series 8100/8120 Drive-Away VSAT family · 98-145510-E;8June2017;191PDFpages

Applies to: Cobham EXPLORER 8000 series 8100/8120 Drive-Away VSAT family · 98-145510-E;8June2017;191PDFpages

Work through these checks

  1. 01 · Cobham EXPLORER 8000 series 8100/8120 Drive-Away VSAT family

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · EXPLORER 8100 / EXPLORER 8120 / 98-145510-E / Power / Logon / Fail/Pass / Ready / Tracking / TX allowed / TX mute / BUC TX / PWR / HELPDESK > Self test

    Match EXPLORER 8100 / EXPLORER 8120 to the 191-page manufacturer-authored EXPLORER 8000 series Drive-Away VSAT original 98-145510-E, released 8 June 2017, in the Remote Satellite distributor archive; the upload path is not the edition. Treat the documented 8100 Ku/Ka and 8120 Ku systems with their listed BUC/ACU variants as one family, not separate dish-size, band, conversion-kit or modem credits; options are not universal. Only observe existing ACU indications from outside installed RF/mechanical exclusion areas (PDF pages 7–9,89). Power steady green means supply OK, red supply failure, off no power. Logon flashing green can mean searching, identifying or carrier lock with modem TX permission: read the existing text; steady green means satellite link established, off no acquired link. Fail/Pass steady red means an operation-blocking system fault, flashing red an active BITE failure/warning, flashing green POST or user-initiated test in progress, steady green no faults indicated; none proves end-to-end internet. Record existing messages without clearing or restarting: Ready can mean waiting for modem data or no satellite profile selected; Tracking means satellite signal lock, not application success (page 52). In an existing authorized dashboard, distinguish RX lock and modem signal level: iDirect OpenAMIP PWR uses 0–500 and values below 250 prompt searching, while other modems report dB; do not apply one threshold to all or change profiles (page 53). TX allowed is modem/reference permission, TX mute is inhibit state, and BUC TX is BUC enable state; actual output indication is separate. Preserve inhibits and never unmute, enable transmission, alter reference signals or run a test. Automatic POST does not authorize HELPDESK > Self test. No deploy/stow/stop/jog, driving, antenna movement, pointing, cable/compass calibration, modem/satellite/network changes, transmission, calls/messages, commands, reset/reboot/update, voltage/fuses/grounding, opening, roof or battery work; do not interrupt a known update or leave a known software upload page. RF distance depends on dish/BUC/configuration and is distinct from mechanical clearance: follow installed exclusions and do not approach the powered antenna. Leave damage, power and accessible-connection inspection to competent service with safe isolation; no live reconnection. Protect serials, GNSS position, IPs, logs, provider settings and credentials. This historical original does not promise current service, options, compatibility or compliance.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.