English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite internet / Detailed guide

Cobham EXPLORER 3075GX manual-deploy fly-away terminal · Exact manual and safe first checks

Cobham EXPLORER 3075GX manual-deploy fly-away terminal · 98-144390-B, released 16 February 2016, intended for software 1.54; modem software is separate

Applies to: Cobham EXPLORER 3075GX manual-deploy fly-away terminal · 98-144390-B, released 16 February 2016, intended for software 1.54; modem software is separate

Work through these checks

  1. 01 · Cobham EXPLORER 3075GX manual-deploy fly-away terminal

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · EXPLORER 3075GX / Logon / Fail/Pass / RX locked status / TX allowed / BUC TX / Reset to factory default / Default Factory Configuration

    Match EXPLORER 3075GX to 98-144390-B, released 16 February 2016 for system software 1.54; the GX modem has its own software version. This manual-deploy terminal is not the non-GX 3075 or automatic 5075GX. Read only an existing authorized display. Logon flashing green covers acquisition stages; steady green means the satellite link is established. Fail/Pass flashing green means POST or PAST is running, not a completed pass; flashing red is an active failure or warning, steady red prevents operation and steady green reports no faults. These LEDs answer different questions. In the existing dashboard, RX locked status is modem demodulator lock, TX allowed is modem permission and BUC TX shows whether the system enabled the transmitter; receive lock alone does not authorize transmission or prove internet service. Preserve existing event codes, status and times privately, hiding coordinates and serials. Reset to factory default deletes profiles, network settings and permissions; Default Factory Configuration at modem level 3 can make the system inoperable. Neither is a harmless status check. Do not log in anew, run self-tests, commission, transmit, alter profiles/position/permissions, reset, update, power-cycle, move the antenna, work on cables or open equipment. Keep clear of the transmit beam and mechanism; qualified authorized service should preserve working links. Historical service maps and headline rates do not guarantee present coverage or throughput.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.