English
EnglishEspañolFrançaisالعربيةDeutschPortuguêsItalianoفارسیBahasa IndonesiaاردوTiếng ViệtBahasa MelayuRomânăΕλληνικάहिन्दीNederlandsTürkçePolskiไทยУкраїнськаРусскийČeština한국어বাংলা日本語简体中文繁體中文FilipinoKiswahiliSvenskaעבריתSuomiDanskMagyarNorsk bokmålதமிழ்

Your country is detected for each new visit. You can choose your country and language.

Satellite internet / Detailed guide

Comtech CDM-570 / CDM-570L / CDMR-570L · Exact manual and safe first checks

Comtech CDM-570 / CDM-570L / CDMR-570L · MN/CDM570L.IOM Revision12 with ErrataA ER-CDM570L-EA12; firmware scope1.6.15orhigher

Applies to: Comtech CDM-570 / CDM-570L / CDMR-570L · MN/CDM570L.IOM Revision12 with ErrataA ER-CDM570L-EA12; firmware scope1.6.15orhigher

Work through these checks

  1. 01 · Comtech CDM-570 / CDM-570L / CDMR-570L

    Match the exact model, product code and manual edition. Record the existing connections, status indicators and displayed error without changing them. Preserve settings and stored data; do not reset, flash software, format storage or alter wiring as a first check. Keep account details, device identifiers and precise location private.

  2. 02 · CDM-570 / CDM-570L / CDMR-570L / UNIT STATUS / ONLINE / REMOTE / Rx-Params / EbNo / BER / RSL / Loss / TPLI / Off / AUPC / Clear-All / Errata A

    For the original CDM-570/CDM-570L/CDMR-570L family, use the 512-page Comtech EF Data MN/CDM570L.IOM Revision 12 with Errata A; its firmware scope is 1.6.15 or higher, not proof of installed versions. No separate publication date is established; copyright 2009 is not that date. This supplier-archived original is not the later A/AL family or a current service guarantee. Observe existing authorized displays only. UNIT STATUS red means a unit fault, orange a traffic/BUC/LNB fault without a unit fault; do not apply another modem's alarm-color rule. ONLINE off can mean external redundancy standby. REMOTE flashing indicates enabled ODU FSK control with a communications fault; preserve control mode. In Rx-Params, EbNo is energy per information bit/noise density, BER estimates error rate after correction, RSL is wanted-carrier power in dBm; an unlocked demodulator can still show RSL. Existing statistics use the configured interval: minimum Loss with a numeric average means lock was lost during the interval, while the average uses locked periods; Loss, Loss means unlocked throughout. Values at or above 16.0 dB display as 16.0. TPLI Off can mean AUPC disabled, not failed power control. Preserve dated fault-onset/recovery history, up to 255 events in day-month-year order. Do not select Clear-All, enable logging/AUPC, change interval, masks, RF/TX/feed, configuration, software or options; no tests, live reconnection, restart, reset or battery work. Escalate damage for qualified safe isolation before cable inspection. Share only redacted existing evidence; historical documentation guarantees no current compatibility or service.

When to stop and get help

Do not continue these checks in unsafe conditions. For immediate danger, use local emergency services and the device’s emergency instructions. Otherwise, contact your provider or a qualified technician.

What to tell support

Write down your exact model, service provider and on-screen message. Photograph the existing connections for your own reference before changing anything.

Original troubleshooting guidance based on the official sources below. Menu names can change. This is an independent guide, not a manufacturer service bulletin or a bench-tested repair.